DSP56U2Ex

source of light and power, W

LEDs • 40; 60; 80; 2x80; 3x80; 4x80; 100; 120

rated voltage, V

230 AC

protection level

IР65

hazardous areas

2; 21; 22

marking Ex (gas - dust)

II 3G Ex nA nC IIC T5 Gc - II 3D Ex tc IIIC T100°С Dc
II 3G Ex ec IIC T6 Gc - II 3D Ex tc IIIC T80°С Dc (for emergency mode)

electrical protection class

I

mechanical durability

М1

correlated colour temperature (CCT)

4000K (3800...4200K)

power factor compensation (PFC)

0,95

ambient temperature

-40°С...+50°С (NF2)


0°С...+40°С (NF3.1) for emergency mode

Explosion-proof lighting fixture is used for lighting highly explosive area 2 and fire risk classes as to marking and hazardous areas of zones 21, 22 e.g. industrial areas of oil- refining, gas, chemical, woodwork and other industries.

ADVANTAGES:
  • operating range of AC voltage 100...305V (for emergency mode 198...264V), operating range of DC voltage 142...431V;
  • there are modifications with emergency units that provide work of luminary in emergency mode not less than 3 hours;
  • source of light - energy efficient LEDs (more than 50 000 hours of continuous work), ecological harmless, don't need special recycling (without mercury), instant light on/light off, stable to change of voltage, multiple on/off, high colour rendering; no harmful effect of low-frequency pulses, no UV radiation;
  • two cable glands make possible transit network connection to power supply line;
  • high IP-requirements;
  • weather-proof - long life cycle.
DESIGN:
Housing: extruded aluminum profile.
Side covers: non-flammable plastic.
Inner reflector (modification -1ХХ): polished aluminum sheet of high quality.
Light-transparent protective element: plain transparent heat-resistant glass.
Control gear: mounted electronic ballast.
Cable glands: 1 or 2pcs.
Source of light: LEDs.

Delivery set: lighting fixture with LEDs source of light, mounting knot.

Installation:
(А) on supporting surface with turning lira
(В) using universal fixing knot:
  • on horizontal supporting surface using screws, threaded rods or bolts
  • on horizontal mounting profile
  • on horizontal pipe Ø25...28mm
  • on vertical rods
  • on hooks

Recommended instalation high: to 18...20m.

Network connection: individual or transit:
  • cable gland with thread G1/2" for not armored cable Ø8...12mm (core section up to 4mm2, for emergency mode up to 2,5mm2).
  • cable gland with thread М20х1,5 for armored cable Ø6,5...14mm (core section up to 4mm2, for emergency mode up to 2,5mm2).
Order example:
VATRA DSP56U2Ex-100-241 N2 decoding of modification:
1 figure • light distribution:
0- 80O, general and emergency mode
1- 110O, general and emergency mode
2- 80O, general mode
3- 110O, general mode

2 figure • network connection:
1- individual, armored cable
2- individual, not armored cable
3- transit, armored cable
4- transit, not armored cable

3 figure • installation method:
1- on supporting surface with turning lira
2- with universal fixing knot:
• on horizontal supporting surface - screws, threaded rods or bolts
• on horizontal nounting profile
• on horizontal pipe Ø25...28mm
• on vertical rods
• on hooks
Specifications:

Contacts

Management & Sales
phone: +380 352 – 47-05-00 * 1000
phone: +380 352 – 47-05-00 * 1048
v.potiuk@gmail.com

Map