DSP21VEx

source of light and power, W

LEDs • 40; 50; 60; 70; 80

rated voltage, V

230 AC; 230 DC

protection level

IР66

hazardous areas

1; 2; 21; 22

marking Ex (gas - dust)

II 2G Ex db eb op is IIB T6 Gb - II 2D Ex tb op is IIIC T80°С Db

certificate АТЕХ

electrical protection class.

I

mechanical durability

М1

correlated colour temperature

4000K (3800...4200K)

power factor compensation (PFC)

0,95

ambient temperature

40W: -40°С...+60°С


0°С...+40°С for emergency modification


50W: -40°С...+55°С


60W, 70W, 80W: -40°С...+40°С

Explosion-proof LED lighting fixture (protection level 1Ex) is used for general and emergency lighting highly explosive areas 1, 2 and fire risk classes; and also hazardous areas of zones 21, 22 e.g industrial areas as oil-refining, gas chemical, woodwork and other industries.

ADVANTAGES:
  • working rated voltage of AC 100...305V and DC 142...431V;
  • the input node is securely connected to the housing with the help of a steel threaded sleeve (passage insulator), which provides not only the strength of the structure but also the maintenance of the parameters of the threaded explosive gap throughout the service life;
  • there are modifications with power 40W that have emergency unit with battery for emergency mode at least 3 hours;
  • or request, lighting fixture can be with DIM driver - regulation of the intensity of the light flux by the method of dimming(1...10V DC) in the range 10...100%;
  • on request lighting fixture can be with DALI driver - intelligent digital control system, which allows automatic and semi-automatic control of the brightness and operation of a lighting fixture or group of fixtures;
  • explosion protection is increased because body’s heating temperature is reduced (LED block is mounted on special radiator, which disposes warm), it helps to use lighting fixture on hazardous manufactures;
  • high IP-requirements, shockproof;
  • weatherproof - long life cycle;
  • source of light - energy efficient LEDs (more than 50 000 hours of continuous work), ecological harmless, don't need special recycling (without mercury), instant light on/light off, stable to change of voltage, multiple on/off, high colour rendering; no harmful effect of low-frequencypulses, no UV radiation;
  • electric components and LEDs are from leading world manufacturers;
  • two cable glands make possible quick transit connection to power supply line.
DESIGN:
Housing: aluminum alloy.
Light-transparent protective element: heat-resistant glass.
Protective grid (on request): steel wire.
Control gear:• driver Mean Well
• driver and emergency unit
• driver with DIM function (on request)
• DALI driver (on request)
Cable gland: 1 or 2pcs., plug (3) for modifications -Х11, -Х12, -Х21, -Х22.
Source of light: LEDs Seoul Semiconductor.

Delivery set: Lighting fixture with LEDs, on request - mounting knot.

Order example:
VATRA DSP21VEx-70- 122 decoding of modification:
1 figure • scattering angle, type of lighting:
              0- 140O, general
              1- 120O, general
              2- 140O, general and emergency
              3- 120O, general and emergency

2 figure • network connection:
              1- individual, armored cable
              2- individual, non-armored cable
              3- transit, armored cable
              4- transit, non-armored cable

3 figure • mounting:
              0- on vertical screwed pipe G3/4-B, on vertical mounting profile
              1- on vertical or horizontal supporting surface with the help of lyre
              2- on vertical or horizontal mounting profile, on horizontal pipe with outer Ø25...28mm, on hook

Installation:

Mounting:
(1) individual -
 • (1A - 1.1) with the help of flange - on vertical pipe G3/4-В,
 • (1B.1) on vertical mounting profile.

(2) individual or transit -
 • (2A - 2A.1, 2А.2) on horizontal mounting profile,
 • (2A - 2A.3) on vertical mounting profile,
 • (2B) on horizontal pipe with outer ø25...28mm,
 • (2C) on hook,
 • (2D - 2D.1) with the help of lyre or horizontal supporting surface with angle min 30О- max 60О,
 • (2D - 2D.2) with the help of lyre or vertical supporting surface with angle min 30О- max 60О,
on request:
 • (2E) to the bracket at the angle 30О,
 • (2F) on horizontal supporting surface.

Network connection:
(1) individual, non-armored cable ø8...16mm (core section up to 4mm2, for emergency mode up to 2,5mm2),
(2) individual or transit:
 • non-armored cable ø7...13mm (core section up to 4mm2, for emergency mode up to 2,5mm2),
 • armored cable ø9,5...15,9mm (core section up to 4mm2, for emergency mode up to 2,5mm2).
Specifications:

Contacts

Management & Sales
phone: +380 352 – 47-05-00 * 1000
phone: +380 352 – 47-05-00 * 1048
v.potiuk@gmail.com

Map