Explosion-proof emergency lighting fixture is used for continued lighting highly explosive areas 1, 2 and fire risk classes; and also hazardous areas of zones 21, 22 e.g industrial areas as oil-refining, gas chemical, woodwork and other industries.
ADVANTAGES:
- emergency power unit -mounted; provides constant and inconstant lamp's operation time and battery charge in constant operation time;
- source of light - energy efficient LEDs (more than 50 000 hours of continuous work), ecological harmless, don't need special recycling (without mercury), instant light on/light off, stable to change of voltage, multiple on/off, high colour rendering; no harmful effect of low-frequency pulses, no UV radiation;
- high IP-requirements;
- weather-proof - long life cycle
DESIGN:
Housing: aluminum alloy.
Light-transparent protective element - cap: heat-resistant borosilicate glass.
Control gear: mounted electronic power supply and emergency power unit.
Cable glands: 1pcs.
Delivery set: lighting fixture, on request - lamp (LSP), mounting element (look mounting scheme).
Source of light: LEDs.
Installation:
on vertical screwed pipe G3/4-В (А1 - А1.1), vertical mounting profile (А2).
Network connection: individual, cable Ø8...16mm (core section1...2,5mm2).
Order example:
VATRA DSP18UЕх-8-005 NF3.1 decoding of modification:
1 figure • 0
2 figure • 0
3 figure • 5- individual network connection
Specifications
|
Lighting fixture type
|
Rated
voltage, V
|
Protection
level
|
Marking
|
Operating time
in emergence
conditions, h
|
Source
of light
|
Luminous flux, lm
|
Battery
|
Dimensions,
DxH, mm
|
Weight,
kg ±10%
|
|---|
|
constant mode
|
emergency mode
|
А
|
Capacity, А/h
|
|
DSP18UЕх-8-005 NF3.1
|
230 АС
|
IP66
|
T6 / T80O
|
3
|
LED
|
960
|
750
|
0,2
|
2,7
|
205х315
|
3,8
|
